Gonna start a new thread.  “Coffee” is a bit restrictive for midweek stuff.  Kill two birds with one thread.

Post here if you wanna get together for a chin wag or go for a spin.

Mid-week refreshments anyone? How about West Village Cafe - the old Wired Monk we used to go to - Hwy 10 and 152 st.
https://goo.gl/maps/d2pjj1ZU2DStAhqW9 say, 10:30 ish Wednesday?

Now if you guys were closer?
   Anyone up in the Kelowna/Kamloops/Penticton/Vernon area thinking along the same lines?  Being retired means being flexible with scheduling.
CHEERS

June has to go golfing on Wednesday so that makes me free.   Hope to be at the old Wired Monk at 1030 and join in.

I should be able to make that.

Cleared some time in my busy workday schedule, see you there.

Would like to make it but heading out backpacking early in the AM - but let's do more of this  ;D

if there's no pictures it didn't happen.
Our regular Sunday coffee started out the same way, just a few guys getting together for coffee and BS

Fresh Street cafe area is open. 

Further to our discussion at coffee today, the common name is still a “doobie”.

We called'm numbers.

Careful, the "Thought" police are out in force these days.
       BTW, anyone in the Interior bunch of Sleazy Riders want to set up a few mid-week coffee meets?  I'm pretty flexible on timing and location, so lets set up a few gatherings before the end of the season.
   Myself and a few friends (I only HAVE a few) are planning to attend the Peachland Bike Show on the 4 th, so possibly we could explore the subject then.
CHEERS

I am interested Ron.

Chances are we'll see the usual suspects at the Peachland Bike show.  We can toss around a few ideas, on where, and when to gather to tell lies.  The Little Cafe in Falkland we have met at in the past has had to cut back their hours due to changes in ownership and staffing issues.  BUT they are open from Wednesdays through the weekend.  At least they were Shen I was there a week or two ago.  These days, one never knows. The Pub across the street has had it's ups and downs in recent months.  Sometimes it's good, other times....not so much.  The Home Cafe in Sorrento has always been good. Open to other suggestions.
CHEERS

Lets give it a try. Wednesday 10:30 ish?

Peter,  June and I were away last week and will be heading to the Okanagan this week.   I should be attending the following Wednesday to catch up.

I’m in.

Will try to make it.

Fresh Street Market seemed to work OK. Wednesday at 10:30ish, hope to see you there.

I should be able to make it.

June and I are back home so I plan on attending and getting caught up tommorrow.

Ended up going for a pleasant ride out to Chilliwack lake after coffee yesterday.

Wednesday, 10:00 at Fresh Street Market?

I guess there must have been the threat of a sprinkle of rain ;D
No one turned up
The coffee was good

What?  Ross, John, and I were there.

We were there until at least 11:30.

I  never saw you, I was sitting outside

We were outside too.  I'm getting the notion that you were at a different Fresh Street Market than the one we were at.  :D  We were at the one at Highway 10 & Panorama drive.

Wait a minute…what day were you there?  Your post was on Thursday.  We were there Wednesday, as per the post on Monday. 

I must have been there on groundhog day
Actually it was yesterday September 15th
There is another Fresh Street in Surrey but they don't have outdoor seating.
Thursday, I'm loosing the plot ???

Old age strikes again

   I've got 5-6 calendars within view during my [curse] work day which is about 13.5 hrs. and my 'smart' phone which tells me everything about,,,,,,,,,,,earth.


  I can't wait until I'm retired.

  ;D

Wednesday, 10 ish at Fresh Street Market? (Hwy 10 & 152st)

Heading to the dentist Wed morning sadly.   :(

I'll try to make it

Wednesday, same time, same place?

Sure.  But if it’s raining, I may give it a miss.

Weather forecast isn't optimal for Wednesday. 

Tomorrow looking good if anyone wants to meet for coffee - I'm planning on dropping into Bent bike so anywhere near or on the way to Langley after 10ish would be good...

I’m busy tomorrow.

how about fresh street 10 and 152nd around 10:30

see you there

Friday this week.  Nico and I riding up to Mt. Baker.  Meet at the Starbucks on Sumas way in Abbotsford with the intent of crossing the border around 9:00.  Fuel up in Sumas.  Bring your own coffee and snacks for a break at the top.  Back down for lunch, maybe at Bob’s Burger and Brew, in Sumas.  Home later in the afternoon. 

You’ll still need the ArriveCAN app and usual border crossing identification.

Baker forecast showing a chilly -4 at 9am rising to +5 at noon.  A bit too chilly for my blood.  :-\

Gonna be a gorgeous day and great ride.

We've done rides in the late fall up country when it warmed up to -4........electric  jacket and fairing, beautiful rides.

Dave, I dunno where you got that forecast, but it’s totally f****d.  It was 14C all the way to Abbotsford then 13C and foggy.  As we left Sumas it soon cleared and warmed all the way to the top,18C.  It continued to warm all the way down, 24C at Sumas.   Blue bird and warm all day.  You missed a great ride.

Sorry I missed it.  I went for a ride up to Whistler instead.  Was a little cool riding up, but warmer on the way back.  Any pictures of your ride?

Only a couple.

AS YOU KNOW I MISSED COFFEE ON SUNDAY
I'M HOPING TO MAKE UP FOR IT ON WEDNESDAY.

See you at Fresh Street Market 9:30 - 10:00 Wednesday

I should be able to make it.  I’ll leave home about 9:30.

Fresh Street tomorrow, 10:00 ish

I don’t think I’ll make it.

See you there

Am I allowed?

If you are on your best behaviour.
I was feeling much better this morning and was going to come for coffee, I will go out later and just stay local.
will be there on Sunday for sure.

I probably won’t be going to coffees for a while.  My bike has developed a “knock”.  I’ll not ride it until I can get it diagnosed.  My appointment at Checkpoint Yamaha isn’t until the 20th.

It’s an odd thing.  At first I wasn’t sure I was really hearing it.  It’s gotten louder and more frequent.  Don’t hear it at idle or revving at a standstill.  Don’t hear it on the centre stand in gear.  Not sure if it’s there at speed.  Once underway, I hear an occasional knock, at least in 1st and 2nd gear, under light load.  Doesn’t seem to be there under harder acceleration.  It is noticeable coasting in gear with the clutch lever pulled in.  It is not at all rhythmic or regular.  Chain and sprockets look good.

Unfortunately the bike is 2 1/2 months off warranty.

Maybe a bad individual coil ?

That is a strange one Ross.  ???

Ya, it’s odd.  Not a miss, a definite knock.

Sorry to hear about your machine Ross, that stinks.

I've had a knock like that turn out to be a cracked piston skirt.

  That is very odd for a Yamaha. They make very well engineered bikes and engines. I will be very interested to hear the diagnosis of this knock.
 It could be many different causes.

Anyone up for coffee tomorrow (Friday Oct 14)?

You are right  Steve.
It's getting a little colder now and perhaps Ross was shivering a bit.
Could the knocking have been his knees rattling against  the gas tank ?

  Or perhaps some other human appendage?????

Ross, Tracer forums mention chain noise, which apparently sound like knocks.

.

Ya, thanks Howard, I had read that.  I did a real good inspection of the chain and sprockets.  All looks good with no tension differences along the chain. 

Coffee Tomorrow at Fresh Street - usual time?

See you there

  Can’t make today lads, little sister is having surgery.

I can’t today guys.

I have to say, I’m not impressed with G. A. Checkpoint communication.  When I dropped the bike off, they said they would call before someone looked at it.  So I waited.  Finally I called them just now.

Turns out the Yamaha warranty guy was there later that day and took it for a ride.  All he said was the chain was way too tight.  Ever since (way back when) someone, Steve I think, pointed out my loose chain, I’ve paid close attention to the tension.  Now, the spec in the manual has the chain really tight.  From all I read about it, the spec is really tight, and should be adhered to.  So I did.  The girl on the phone says that because the chain was so tight, the chain and sprockets are prematurely worn.  I think they look just fine, but oh well, I’ll have them replaced.

But I’ll definitely go in tomorrow to speak with someone face to face about proper tension.  And price/quality options.  Hopefully it’s as simple as worn chain/sprockets.

I wish they had called me.  I’d probably have had the bike back by now, or at least had the chain/sprockets ordered.

Are we meeting for coffee on Wednesday October 26?

see you there

Ross, aside from worrysome issues with communication, this may be the solution, fairly simple to sort out, at least.   Lets hope.

Hey, if it were a 'guzzi, they would have lied to you for six weeks, then forgotten to order the part a few times.

WHAT!?  No ribbing about shaft drive?  I’m disappointed ☹️

So Checkpoint has chains in stock but sprockets are ordered.  Should have it completed early next week.

The offer of s shaft drive Guzzi is still on the table if you want to enjoy the experience.

Thanks very much for the offer Roy.  The weather forecast is S#*te now for quite a while.  The parts should be in in Friday but their service department is unmanned on Saturday, so the bike won’t be ready until next week.  If I’m jones-ing to ride in the rain I’ll take you up on the offer.  Sandy will be away next week, so I may need a ride out to Checkpoint to get the bike though. 

I was taking it easy on you because the bike was out of warranty.

If it were covered, I'd have ridden you like a rented pony.

  I'm gonna be right careful not to offer comment on anybody else's bike chain tension from now on. Serious stuff!!!!

No worries Steve.  The chain was excessively loose.  I hadn’t attended to it at that point since I’d bought the bike.  Total lack of attention on my part.  My issue now is, and something I’ll clear up with Checkpoint, that the owners manual specs the chain way too tight, or I’m misreading it.

  Chain tension specs and adjustments are sometimes very odd. Chatted about this at Wednesday coffee,,,,, my  big red pig offers instructions calling for on side stand with 150 pounds, or my third leg, whilst distance of 1 3/8 to 2 1/4 inches , 1/2 way between centre pivot of swingarm and centre of wheel. Frustrating.  Maybe 2 legs, and 1/2 my belly??

Steve took some ribbing over that
Glad to offer a ride Ross, sure if the weather smartens up come and take the blue Guzzi, it will spoil you though.

Fresh Street around 10:00 am tomorrow..........

 

Today when John and I arrived at Fresh Street, our usual table was occupied by about a dozen construction workers, but fortunately they moved off before 10:00, I told Steve that John told them to bugger off. HaHa
I think they just had to get back to work.

Yeh, they were scared alright, good thing I had Roy as backup.

  John has an intimidating presence! I'd move off too if I was in a group of 10 construction workers, and John walked up and smiled!!!  Dam!!!

Tomorrow, 10:00 ish, hope to see you there.....

  Be there with my snow flake tires,,,,,

BTW Steve, I reckon I bought my Apollo 10speed in 1971 or 1972 in Lethbridge with money from delivering flyers.  Seems to me I paid $90 or $100.  Later in 1973 I got my first hourly part time job in that same bicycle shop.  $1.10/hr I seem to recall.  Bert&Macs Cycle, Canada’s oldest Suzuki dealer as well.  They also sold CanAms and Skidoos as well as hockey equipment.

  Very cool!   I bought my Apollo Sport Ten in 1976, from White Rock Bicycle Shop, just south of 16th avenue on Johnston, just down the hill on the right. $127. It's near mint even after my crash last spring. Even has the original seat. Same model as this pic, mine id light blue:   https://vancouver.craigslist.org/rds/bik/d/delta-central-apollo-sport-10/7543227163.html

   Also have this bike: https://classicjapanesebicycles.com/maruishi/

    Also a 1964 Raleigh 5 speed Brooks.
 
   And my trusty 1990 Marin Bear Valley.

Yup same Apollo as mine.  I ditched the fenders.  Mine was a fine metallic mauve colour.  It got stolen from school one day in winter.  I followed the tracks in the snow and found it in a lane quite a ways from school.  Do damage.  Luckily there was a inch of fresh snow.

Same time Wednesday?

Same time; see you there.......

I am looking for some reading material to get me through the winter.
If anyone has old issues of vintage bike magazines to pass along please bring a few to Wednesday coffee.
Thanks a lot
James

I have some I will bring along.

I won’t make it to coffee tomorrow, guys.

  What’s the call for coffee today boys?

I’m staying home.

  Chain too tight again?

I have to out that way anyway so I'll be there

I’ll be there.

Naw, too many loose nuts on the roads. 

  New Westminster.   Understand.

  Mid week Coffee?

see you there........

 


  Yo

See you there.

Fresh St, 10:00ish............

  Yo

  The roads are good in South Surrey. I’ll be there at 9:45.

see you there.....

Coffee tomorrow?

see you there.....

I won’t be at coffee tomorrow.  My grandsons are in two separate hockey tournaments.  One in PoCo, the other in Abbotsford.  Have to shuttle between venues.

   I'll be there dudes.
   i have free stuff to give away.

  1st midweek coffee ????

I'll be there, God willing.

  I’ll bring your jacket. And more free stuff.

  Jan 11 coffee?

Yep

Hey Dave,

Could I borrow your carb balancer please?

Ross

Same bat channel?  Same bat time?

  See you guys there!!

  More stuff to give away. More Moto Guzzi literature.

Further to today's meeting: https://en.wikipedia.org/wiki/Laser_turntable (https://en.wikipedia.org/wiki/Laser_turntable)

  Coffee and chat in the snow?

see you there.........

  In honour of the Kamloops and Okanagan boys showing up at some forlorn public house in Falkland [been there, spent a week there steeling fish] to trade lies,,,,,,,,,,I feel I need to join them in spirit, at Fresh Market, in Western Cloverdale.

   Re: San Fransisco Tourist info:

https://wmmr.com/2019/04/17/someone-made-an-interactive-san-francisco-poop-map/

As per our discussion, I took a look at the 77 CB750 red paint.  Definitely worth thinking about.  Cost would e higher than black as the red is a three coat candy red.  But it sure does look nice.

  CB750K in gloss red for the win!!!! 

  Crap, maybe I'll buy it!!!!

  if i had the room!

I won’t be at coffee Wednesday.  I’ve a physio appointment.

   A psychologist appt??   Thank goodness !!

    I think I'll be on 4  wheels rather than 2 tomorrow lads! Even though the Messerschmitt has snow flakes on her tires.

I should be able to make it to coffee tomorrow.

Sorry I missed Bear at coffee the other day.  Should be there tomorrow though.

   yup. i'll be there.

See you tomorrow.

Further to our discussion today, I’ve order new brake lines for the CB 750.  I’ve pretty much decided not to bother with a collector plate.  I’ll make her a good runner and bit the bullet on insurance.  Also I’ve decided on a name for her.  My last project was the LedZed.  This one is Black Betty.  I was thinking of Black Beauty, but she’s kinda plain, so it’s Black Betty.  No offence meant to all the Bettys out there. 

That's OK, the Betty in my house is a Beauty.

  All my motorbikes are bitches.

We’ll see how it goes.  I may bring Betty on Wednesday.

  Maybe when the lights are low, glass of rose, she's got sleepy eyes, she'll get a "Bett",,,,,,, 

I’ll be at Wed. Coffee. Was out on the Borton a couple hrs Tuesday afternoon, bloody cold!! Won’t be on a bike, call me softy.

I’ll not be at coffee tomorrow.

Here's a link to the YouTube page of the boat building guy I mentioned at coffee this morning.

https://www.youtube.com/@SampsonBoatCo/videos (https://www.youtube.com/@SampsonBoatCo/videos)

We’ll see how my shoulder feels in the morning.  I may bring the CB750.  I d like some input ahead of the gathering on Sunday. 

  I’ll be there. Be nice to see the big CB.

She ain’t pretty.

Yup, TPS.  I’ll take the tank off and check connections.

  A motorcycle stall out on the very worst place for a motorcycle to breakdown, in the entire world!!!!!

   It’s got to be just a plug in, rather than a component failure.

I think it unlikely that the APS ( apparently it’s not a TPS) is faulty.  It’s an Accelerator Position Sensor.  Most likely a connection I reckon.  It quit once more on my way home.  Thankfully I coasted into a parking lot where it rectified itself again.  And thankfully I got across the Patullo Bridge ok.

I got home and plugged in my code reader.  Sure enough, APS error.  A bit of a process to get at it.  All kinds of different fasteners to remove 5 plastic panels in order to lift the tank before disconnecting the fuel pump electrics, fuel line, and vacuum lines.  Then the APS is right there.  I disconnected the two plugs (they looked fine) and sprayed on some de-oxidizer. 

Reassembled and rode uptown to the library.  Short ride but all good.  Think I’ll not go out on the highway or across any bridges for a while.

So, I took the Tracer900 out for a 1 3/4 hr ride this morning.  Rode around Belcarra, Anmore, Buntzen Lake.  The Yamaha didn’t miss a beat.  Perhaps (

  Glass half full Ross!!!!

  I’ve taken the Red Pig out of slumber, to analyze vibration feedback after extensive engine modifications. Ummm, I changed the spark plug. The engine still gives off indications that it is running . So that’s good,,,,,,,plus I just put a fresh battery in my Omega, so there’s that I guess.

Randy Meisner was the first of three Eagles base players who came from Poco.

Forecast for tomorrow, Wed Jun 20/23 is for rain.  Thursday is looking much drier - any interest in moving coffee to Thursday this week?

  I won’t be able to do either Wednesday or Thursday this week unfortunately.

Normally Thursday would work well for me but, this week, I won't be able to attend on either day.

Not sure if anybody is actually in town for Wednesday coffee. I’m back here, will head over to Fresh Street if anybody responds here before 8 am Wednesday.

Yep, I will be there.

See you there.

I’m delivering family members to the airport.

Wednesday coffee is a go, at Fresh Market.

see you there!

   Give us an update Ross??????

BCAA came about 11:40.  Got the Yamaha started and went straight to Edmonds Battery in Bby and had it tested.  300 CCA and 12.7 volts.  Mind you that’s coming straight off the ride along hwy10 and Alex Fraser Bridge.

So it should be fine.  I’ll check the voltage tomorrow and see how much it drops.

I put the light weight jumper cables in my pannier.

  BCAA is pretty handy, from my experience.

   Be curious to see the status of your battery considering the potential remote riding you have planned.

After the bike sat for a couple of hours after I got home, the battery had 12.6 volts.  We’ll see what it is in the morning.

This morning the battery is at 12.55 volts.  I reckon it’ll do for a while.

https://www.youtube.com/watch?v=OiYzmVhgm2s

Resting voltage:       12.55
Cranking voltage:   ~11.0
Charging voltage:     14.0

All looks good.  I must have left the key turned on longer than I thought.

At least now I know where the fuel Injection fuse is.

  See you guys out there??  Or will the 99 overpass thing cause an issue?

Forecast shows rain tomorrow morning.  Any interest in moving to Thursday morning?

  For sure, Thursday, to avoid rain, yup.

I seriously doubt there will be rain tomorrow.  But I’ve a dental appointment tomorrow morning, so Thursday would be better for me in any case.

Good thing I checked, tomorrow it is.

Thursday: good

   Yup, Thursday.

Are you guys OK to do midweek coffee this week on Thursday again?

  I think Wednesday,,,,, unless someone needs to do stuff??

OK, see you next week.

Wednesday will work best for me this week. Going camping ( in the motorhome) with the grand kids on Thursday this week.

  Just throwing g out there,,,,,looks like big rain Wednesday morning,,,,,,,,,,

Anyone going for coffee in the am.  Maybe rain, maybe not. Got a car so I don’t care.

  Gonna rain but I’ll be there for coffee Wednesday morning. Car or bike depending on weather. Red pig is covered in dust, needs a wash.

   Coffee and a muffin at Fresh Street. Bumblebee time.

Further to our discussion of SOHC CB750s.  Delkevic makes a 4 into 1 stainless exhaust.  Delivered for about $520.  Accommodates the centre stand.  I thought they produced a 4 into 2, but sadly not. 

  Thanks Ross and James for helping out with my loose side stand. Made it home fine, and new return spring on in 15 minutes. Will return your handy wire next time I see ya Ross!!

I won’t make it to coffee tomorrow.  Dr. appointment.

Just to mix it up tomorrow (Wed Sep 19/23), any interest in riding to coffee at Horseshoe Bay for then on to Squamish for ??

Would like to take advantage of as much dry sunny weather as I can before vitamin D deficiency sets in.   8)

  I won’t be able to make coffee tomorrow, but just a heads up, an overhight semi just smashed into the Dollarton overpass 6pm Tuesday  night, closing down North Vancouver access to all traffic, pushing everyone the Lions Gate. Could be messy over there tomorrow.

Ya, that's not promising.

I’m going to the Fresh Street Market. They have good coffee.

Fresh Street tomorrow morning?

I’ll be there.

Looks like I will have to skip mid-week coffee tomorrow as going back to hospital for some more tests.

  Good luck on the tests John.

  Gonna be 1/2 hr late Wednesday coffee lads. 8 am dentist appointment.

Anyone want to meet for coffee on my boat in Ladner?
Address is 4850 McNeeleys Way, Ladner
Pass to the right of the red house and stop at "C" dock near the end of the parking lot.
I'm the last boat on the right
If you are coming please reply, so I'll know how much Starbucks to bring.

great! see you there

Ya, I’ll be there.

  Don’t think I can make it on time after my dentist appointment.

You have to make it Steve  
Bucko's bringing donuts.  ;)

  That is a worthy reason for sure, but wouldn’t get there till past 10. It’s all good buddy,   You can have my donut!!

I’ll probably be there around 9:30.

Count me in, see you there.

see you tomorrow

Stan, many thanks for hosting coffee on your boat.  A most enjoyable venue.

Thanks for bringing donuts, Dave.  I think I ate three of them.

Yes, it was a good meet, thanks for doing it Stan and for the donuts Dave.

Yes, Thanks Stan. Most enjoyable morning.

We must do it again soon

Is anyone going to coffee tomorrow?

I can't make it this week. 

 I’m still in hospital

I won’t be at coffee Wednesday nor Sunday.

   I'll be at coffee.

Good to hear you are back in action. See you tomorrow.

Hey Bucko, will you be at coffee tomorrow?  If so, I’ll bring your packages.

Cheers,
Ross

Yes, I'll be there.  Thanks Ross.

Can’t make it today, see you next week.

  Any thoughts on coffee tomorrow, re: the weather forecast Wednesday morning?  My vehicle is highly capable  in the conditions they are forecasting, but others may be not comfortable with those conditions.

I won’t be going anywhere tomorrow.  Freezing rain turning to snow overnight through tomorrow.  Sounds like the valley will really get slammed.

  Perhaps Thursday?????

Possibly Thursday.  Depends on if/how much it snows and how much gets packed down.

Yes, Thursday maybe a better option. News tonight said up to 25cm by midday. My car and I are capable, but in this area, others are not, and I won’t risk it.

  Tentatively Thursday then.

Not likely I’ll venture out tomorrow either.  We have well over 20cm of snow already.  Still puking down.  Supposed to stay cold with more snow later tomorrow. 

Yesterday in the village of Maple Ridge the idiot alert took hold several hours before any snowfall was to arrive.   The work vehicles were salting, sanding and preparing the roads for the onslaught ahead.  Sounds of grinding and twisting of metal and the honking of horns as many use to signal they are not stopping at stop signs or red lights.   The sounds of floored engines in low gears surrounded us.   Now that the snow is upon us   it would seems staying on the roadways are merely a suggestion for some.   It is now quiet here and just waiting for the villagers to return home in a day or two with new vehicles mostly with custom signage on them from several body shop companies.   We have 9 inches here right now and still coming down hard.   Looks like it is time for me to dress warmly, grab a fold away chair and a giant popcorn and head down to the street corner and sit and watch the show for a while.
Garage time can wait until later!

  City of Surrey has been very aggressive the last week with salt brine and huge amounts of salt on the roads. Which have done sweet bugger all towards snow management. Confirmed a full 12” on the hood of my truck 10 minutes ago. I have no worries with the capability of my little 4x4 Ranger with new Toyo snowflake trrrain tires, I’m able to push through 3’ of fresh snow , just pushing it out of the way. It’s always the other low IQ entities with driving practices in alignment with their former homes in tropical regions of the world, ill equipped vehicles and completely incapable skills.
 

Did I fail to mention to unplug your electric car during this cold snap.   The government has told BC and Alberta they might have black outs from over usage.

Anyone know where we can purchase a couple bags of coal?

Getting a bit warmer here, +2C.  Still snowing small, high water content flakes.  25cm accumulation but settling as it snows.  Supposed to stay below freezing overnight with more snow later tomorrow before turning to rain later in the week.  Warm, +6C on Sunday. 

Took a rip around the neighbourhood with the Nissan in 4x4.  What a hoot!  But very very slick.

Been interesting reading the internet comments from all over North America about the issues people are having with their wonderful modern wizz bang electric vehicles.  I can hardly wait for the powers to be to ban all ICE vehicles. Big Brother is watching you.  And he knows Dilly Squat about the real world.

  My experience working at an official Tesla repair centre,  make it very aware to me the shortcomings of battery output in cold weather, indeed charging in cold , company mandates that we must never leave the cars outside below predicted -10c. Add the 1.5% battery draw daily even just sitting there in the driveway in non frigid temperatures.

  I went for a drive today to investigate  road conditions. Delivery trucks from 3/4  ton vans to Hino cab over 3 tons are found at corners and back roads, front wheel drive sedans found along all hill climbs  with summer tires.  Extensive use of salt and salt brine has done nothi g to disperse the 12”+ we got here ( as of 3pm ).

It’s 1C at my house in New West.  I measured just now 30cm of snow on the patio table.  Expecting -4C overnight.  More snow expected tomorrow afternoon/evening/overnight.  Main roads in New West clear and wet, all other roads deep snow over ice.  Clear wet roads may well freeze overnight.  Hard to say from forecasts how much snow we’ll get from the next system arriving later tomorrow.  Could be a little, or a lot of snow before it turns to rain overnight Thursday night.

Just now though I’m sitting in my lazyboy with a tequila and lime imagining that I’m lounging on the beach in Mexico.  

Not going to coffee tomorrow fellas.

As far as electric vehicles go, I’m at the point where I just chuckle.  I’ll drive my ICEs until I can’t, for whatever reasons.  My truck is a 2006, my car is a 2019, motorcycles are 2019 and 1975.  All will last me until I can’t get gasoline. 

People have ditched their ICEs for their own reasons, none of which are compelling to me.  For me now, it’s a case of schadenfreude. 

HA HA!!!

  I’m glad to see you’re doing your part  to help with the “existential climate crisis” responsible for the cold and the heat, and all the temperatures in between  .  Lolololololololololololololololol

 I'll be at Fresh Street Market tomorrow around 10  right after my 8:30 Kiniseology appt

   I'll be at Fresh Street Thursday morning. The roads have been improved dramatically, and no snow tonight. I could use a coffee and muffin!!!

I'll believe it's a crisis when the people who are telling me it's a crisis, act like it's a crisis.

  Good chat today lads!!  I took Peter’s advice to take a fabric to sit on, to offset the cold metal seats there, much improved!!!

Thanks for bringing Roy out for a visit this morning Ross. Good to see him, and he does look to be doing well.

Ya, I’m glad he came out.  I’ll try to get him out on Wednesdays. 

Coffee tomorrow?  I’m trying to get Roy out again.

I plan on being there tomorrow.  Need a break from working on the TSX all day today as some parts arrived from a couple of suppliers today.

 

  Coffee Wednesday?

At Fresh Street Market?

I’m planning on it.

Does anyone happen to have an inductive pickup timing light that I can borrow?  I can’t get my old hardwired timing light onto the #2 or #3 spark plugs because of how they are situated in the CB750.

I had done a static timing but wanted to make sure it was dead on with a timing light.  And dammit, one thing leads to another.  I started it up, but it seemed a bit off.  Wouldn’t you know it, #3 isn’t firing.  There’s fuel in the bowl and there is spark, but no fire.  Exhaust pipe is cold.  Dammit, carbs have to come off…again. 

But I can still check the dynamic timing if I can obtain an inductive timing light.

I have one Ross - not 100% sure it works but it did the last time I used it (sometime in the last couple of years).  Not sure when I'll be out for coffee next though...

  Save a seat lads, running late tomorrow.

If nobody brings one to coffee tomorrow, I’ll buy one online.

I will bring one Ross.

Thanks John.

I won’t be at coffee tomorrow guys.  Came down with a plague Friday evening and am still really sick.  It’ll take a while to get over this one.

   That bug is going around. I caught it in Mexico, developed into walking pneumonia.

   Eat raw garlic. 

Finally feeling mostly back to normal.  Washed the Yamaha this morning and tried once again to get #3 cylinder on the CB750 to fire.  I think there’s an obstruction in the pilot system in the carb body.  Double dammit.

Will insure the Yamaha tomorrow and ride it to coffee on Sunday.

Ft. Langley, I presume?

Hey James, are you going to coffee tomorrow?   Could I borrow your clear tube tools again? Thanks.

  Won’t  be at coffee today lads. Preparation for another medical procedure tomorrow, involving drinking caulk like substance, if you k ow what I mean.

If it's only once a year, that just make you curious. 

 8) 

  Thankfully not once a year. Not fun.

Going to try to make coffee tomorrow if anyone else is going ????

Neither Bob or I are going.  Not sure about Roy.

  I’ll be at Wednesday coffee. 9 am.

Change of plan.  I reckon I’ll head to coffee this morning.

Nice to see Roy out for coffee this morning. :)

I’ll be riding the CB750 tomorrow.

I should be there also.